How To Tackle Mould Growth During Water Damage Restoration?

Water damages to buildings can have a serious detrimental effect on the structural integrity of the house. Once it seeps into the crevices of the concrete, signs of mould and mildew growth are common. The best way to tackle it is to nip the problem in the bud, or you’re facing significant repair costs in future.

The article helps you with useful tips to combat this menace during water damage restoration in Melbourne.

Tip 01 - Reduce Indoor Moisture

The first step to curb mould or mildew growth is to control dampness. Some of the worst infestations thrive in damp attics, crawlspaces and basement walls where the water leaks from the outside. Ensure proper ventilation with proper sealants to ward off the harsh weather elements. Manually dry up everything from cupboards, vanity to remove any spots of lingering moisture.

Tip O2 - Remove the Affected Flooring

If you have carpeting or rugs on the floor, you must remove them immediately by professionals dealing with water damage remediation in Melbourne. To eliminate any possibility of “wet-water cases”, instruct the restoration specialist to thoroughly clean the carpets, dry them and reapply only if there are no signs of mould infestation. However, keep in mind that reusing these floor “pads” isn’t recommended for weeks once it gets wet.

Tip O3 - Properly Ventilate the Affected Wall Materials

In most cases, mould or mildew growth happens in clusters rather than spreading across the entire wall or floor surface. Thus, you must ventilate the affected walls properly to avoid further growth of mould spores. For that, you need to:

• Tear away the parts of saturated wall materials (like wallpapers)
• Dispose off the wet insulations
• Install slits on drywall to allow the moisture beneath, to escape
• Remove wet baseboards (if any)

Tip O4 - Destroy any Mould-Affected Object

Especially if you’re out of town when flooding occurred, it’s impossible to gauge fully the extent of mould damage. So, if you encounter any mouldy object like fabric or metal, ask the professionals at water damage restoration in Melbourne to clear them up and disposing them for good.

To prevent further spread of mould spores and contamination, seal everything affected by moulds in trash bags. With the help of restoration specialists, freeze any mould object or items to salvage them right away!