Tips On How To Maintain Properly Your Front Load Washing Machine

Front load washing machines these days cost a hefty amount of money. Sometimes, the cost of front load washing machine repair in Bangalore is more than the machine itself. If you don’t want to spend much money on repairs and on a new washer soon, you have to maintain your washer.

Start following these tips:

1. Run an empty cold water cycle once a month. Add a cup of white vinegar and two cups of dissolved baking soda. Keep in mind to use dissolved baking soda. As you are using cold water cycle, dry baking soda may not dissolve quickly. Allow the machine to churn the cleaning solution. This will assist loosen up accumulate mineral and debris within the washer. It will also assist in getting rid of unwanted moldy smell.

2. After using your front loader, open the door of the washer and then wipe the washer drum using an absorbent cloth. Be sure to dry the drum as much as you can to avoid molds and mildew accumulation. Leave the front door open. If the front door is taking sufficient space within your room, you can insert folded towels at the bottom part of the door to open the door halfway. This will permit air to circulate within the washer.

3. Remove kinks in the washer hoses. This may cause poor water flow. Moreover, check the hose rubber seal for symptoms of deterioration. Replace the water hose if the rubber seal is already damaged. This may cause leakages.

4. Clean the water filter once a week. Remove the hose at the back of the washer and extract the filter. Use a soft-bristled brush to get rid of accumulated debris. You can also soak this in a blend of water and vinegar to loosen up debris. Blocked water filter can cause low water pressure. If your front loader has hot and cold water hose, be sure you know where to attach them again.

5. Put the machine on a platform. Along with reducing washer sounds and balancing the laundry loads, this will also prevent deterioration of the bottom part of the washer. If it is jiggling often, the motor at the bottom of the machine may disintegrate rapidly.

6. If your washer has a spin speed option, just set it to medium spin speed only. Fast spin speed may cause fast deterioration of the motor of the washer.
7. Stay away from using hot water cycle. This damages the motor of the washer and the heating element rapidly.

Conclusion

If you know a good repair guy, you will have peace of mind at least knowing that it was done right. You can save much on top load washing machine repair in Bangalore or you can leave it for the professionals. The choice is yours.